Inside Acer Nitro 5 (AN515-54) – disassembly and upgrade options

Nitro 5 (AN515-54) is part of a new generation mobile devices, that is set to feature the latest NVIDIA GeForce GTX 16xx and the 9th Gen. Intel H-series CPUs. Additionally, we saw it perform great with its 144 Hz screen, but what about the upgradability of the device? Let’s find out.

Check out all Acer Nitro 5 (AN515-54) prices and configurations in our Specs System or read more in our In-depth Review.


1. Remove the bottom plate

Nothing unexpected here as the disassembly process starts with unscrewing 11 Phillips head screws and prying the bottom plate out of its place. As you can notice, Acer ditched the service lids so you need to remove the whole plate even if you want to upgrade only the memory. However, they have made easier removing the bottom plate itself, so we are keen to believe they have made the right choice.


2. Battery

This laptop is equipped with a 58.75Wh battery pack, which is only held in place by some clips – no screws whatsoever. Additionally, the cable that connects the battery to the motherboard is fixed in place with some tape. As far as battery life is concerned, we were able to extract around 8 hours of web browsing and video playback, which is a great result for a gaming laptop!


为了模拟真实情况,我们使用自己的脚本自动浏览了70多个网站。

对于这样的每一次测试,我们都使用相同的高清视频。


3. Memory and storage

In this section, you can see one of the strongest selling points of the Nitro 5 (AN515-54) – the storage upgradability. It features a SATA connector as well as two M.2 NVMe-enabled slots, that support RAID 0 – rarely to be seen in a rather budget gaming hardware. In addition to that, you can equip the notebook with a total of 32GB of DDR4 memory working at 2666 MHz.


4. Cooling system

Nitro 5 (AN515-54) is utilizing the same cooling design as its predecessor. A couple of heat pipes shared between the CPU and the GPU, while there is one more only dedicated to the graphics card. Despite the fact that Acer has put a large plate on top of the GPU VRMs and memory, this design is not the most efficient one. Especially, in extended periods of gaming, where the heat from the CPU has nowhere to go, except towards the graphics card.

Intel Core i7-8750H (45W TDP)0:02 – 0:10 sec0:15 – 0:30 sec10:00 – 15:00 min
Acer Nitro 5 (AN515-54)2.69 GHz (B+22%) @ 63°C2.82 GHz (B+28%) @ 66°C2.56 GHz (B+16%) @ 74°C
NVIDIA GeForce GTX 1660 TiGPU frequency/ Core temp (after 2 min)GPU frequency/ Core temp (after 30 min)
Acer Nitro 5 (AN515-54)1660 MHz @ 78°C1635 MHz @ 84°C

Check out all Acer Nitro 5 (AN515-54) prices and configurations in our Specs System or read more in our In-depth Review.

订阅
通知
guest
18 Comments
内线反馈
查看所有评论
rafael
rafael
4 年 之前

what size of screwdriver did you use for the ssd?

Jim
Jim
4 年 之前

Where do I find the motherboard make and serial number on the board on this model?

James
James
4 年 之前

How to remove the back cover?? Thx in advance

Qyu
Qyu
4 年 之前

If I raid 0 my 2 ssd nvme which 1 have windows installed and the other 1 empty , what will happen with the 1 that have windows installed in it ?

James L Jones
James L Jones
4 年 之前
回复  Qyu

Creating a RAID array will always blank the drives that are part of it. Back up or clone your system first. Create the RAID array and then install a fresh copy of Windows or use your cloned drive to restore everything.

José Egydio
José Egydio
3 年 之前

i’m trying to create a raid 0 array on an515-54, with two nvme ssds. However, nothing happens when I press ctrl + I. The only possibility is to create the raid through windows? Or is there any other key sequence?

Artiom
Artiom
4 年 之前

Can you upgrade the GPU?

Kay
Kay
3 年 之前
回复  Artiom

No, it is soldered into the motherboard

Michał Małagowski
Michał Małagowski
3 年 之前

I wonder if dissasemblying and installing a 2,5″ drive voids the warranty

pew
pew
3 年 之前

Yes, you need to go to an acer registered shop to do the installing without harming your warranty.

aamir
aamir
3 年 之前

I have nitro an515 54 74jy indian version if thats what you guys call it. It has 2TB HDD and 256gb SSD installed with 8gb of ram all this factory installed. Can i upgrade SSD to another 500GB is there any M.2 slot available? please advise very confuse with acer support & other people saying no.

Sworup
Sworup
3 年 之前

I tried to change my thermal paste but had no idea they used thermal bulk instead of thermal pads. The bulk dried up too quickly when I opened it so now I’m thinking about switching to thermal pads. Any suggestions or things I should know?

Captain Jack Harkness
Captain Jack Harkness
3 年 之前

You’re full of shit. At most, all i get is 2 hours out of this thing.

FrostyIce
FrostyIce
2 年 之前

Yeah. No way this thing gets 8 hours. 2 hours maybe 3 hours tops!

Vince
Vince
3 年 之前

Please what is the model of SSD i nedd. I’m asking for the pin form

Joey
Joey
3 年 之前

Do these ship with Intel® Optane™ memory built right in the notebook? Same model number. Model Name: AN515-54 16GB
Also listed on the site is Model: NH.Q96AA.004 from WallyWorld

Shaan
Shaan
2 年 之前

Where is the Graphics card and CPU Processor Located?

jim camel
jim camel
5 几个月 之前

very handy no lie! ., ive owned my acer nitro 5 for 3 years now and i just ordered 32gb Crucial Ram too up grade, and a 1tb nvme m2 pcie ssd. my warranty is up so i might as well crack er open and upgrade it. no Computer repair shops in my area so im up too the task. if i clean the Fans inside do i have too remove and replace the thermal paste or what ever. i imagine its a wee bit dusty inside of it over the span of 3 years and would like it nice… Read more »

Last edited 5 几个月 之前 by jim camel