MSI Creator Z16 (A11Ux)の内部 – 分解とアップグレードオプション

Creator Z16は本当に素晴らしいデバイスですが、プラスチック製のこじ開けツールを使って開けるのは大変です。

すべてのMSI Creator Z16 (A11Ux)の価格と構成をスペックシステムでチェックするか、詳細なレビューをお読みください。

1.底板を外す

このノートパソコンの内部に入るには、6本のプラスネジを外す必要があります。そのうちの2本は背面のゴム足の下にあります。その後、プラスチック製の工具で底板をこじ開けて、シャーシから取り外します。

2.バッテリー

残念ながら、あなたの仕事はここで終わりません。マザーボードの向きが逆なので、アップグレード可能なパーツにアクセスするためには、マザーボードを取り外す必要があります。まず、90Whのバッテリーパックを外して、シャーシから離します。続いて、プラスチック製の保護フィルムを剥がします。その後、Wi-Fiカード用のネジとファン用のネジを含む、マザーボードを固定しているすべてのネジを外します。なお、ファンのネジの1つはディスプレイケーブルの下に隠れているので注意してください。

ケーブルについて言えば、マザーボードをシャーシから持ち上げる前に、すべてのコネクターを外してください。

3.メモリとストレージ

ようやくマザーボードを取り出したので、2つのRAM SODIMMスロットと、2つのM.2 PCIe x4スロットが見えています。

4.冷却システム

冷却システムは、CPU用に2本のヒートパイプ、グラフィックスカード用に2本のヒートパイプ、そしてグラフィックスメモリの熱を管理するための追加のヒートパイプで構成されています。

MSI Creator Z16 (A11Ux)の価格と構成はスペックシステムでご確認ください。また、詳細なレビューもご覧ください。

MSI Creator Z16 (A11Ux) 徹底レビュー

From making high-end gaming laptops to somewhat affordable office solutions, MSI is now well established in the portable computing industry. A couple of years ago, a market emerged seemingly out of nowhere - the content creator one. And last year, MSI converted its GS66 device into the MSI Creator 15. We can't say it was a total hit among its target audience, but it was good enough to deserve our "Editor's choice" award.Today, however, we mark a step in a completely different direction, regarding the design. Gone is the industrially-inspired gaming look, the sharp corners, and the boxy de[...]

長所

  • Aluminum design and great build quality
  • Large arrow keys, RGB backlight, and responsive touchpad
  • 2x SODIMM + 2x M.2 PCIe x4
  • No PWM (MNG007DA1-1 (CSO1600))
  • Full sRGB, and DCI-P3 coverage + 92% Adobe RGB coverage (MNG007DA1-1 (CSO1600))
  • 120Hz refresh rate with fast pixel response times (MNG007DA1-1 (CSO1600))
  • 2x Thunderbolt 4 + MicroSD card slot
  • IR face recognition + fingerprint reader

短所

  • Underperforming CPU
  • Uneven color uniformity
  • Relatively difficult to upgrade
サブスクライブ
通知する
guest
2 Comments
インライン フィードバック
View all comments
tombox
tombox
2 歳月 前

Upside down motherboard … need to take a day off to upgrade … never buying this one.

carbarazzi
carbarazzi
1 年 前

To install a second SSD it´s noct necessary to remove the mainboard. You can reach the slot easily after removing the bottom plate of the notebook.