Inside HP 470 G7 – disassembly and upgrade options

LaptopMedia.com 亮点 Inside HP 470 G7 - disassembly and upgrade options

从: Alex Iliev 19 5月 2020 / 04:08 1

Once again, HP has tried to hide most of its precious screws with the help of the rubber strips. However, they are easily removable with a flat-head screwdriver, or preferably a plastic tool.

Check out all HP 470 G7 prices and configurations in our Specs System or read more in our In-Depth review.

#CommissionsEarned

HP 470 G7

处理器: Intel Core i7-10510U
显卡: AMD Radeon 530 (2GB GDDR5)
RAM: 8GB RAM
STORAGE: 256GB SSD

详细评测

$2751^.20 价钱多少？

查看所有结果

1. Remove the bottom plate

After you take out the rubber feet, remove all of the Phillips-head screws you see. Then, turn the laptop around and open the lid. This is where the prying process happens. Next, make your way around with a guitar pick, and remove the bottom panel from the chassis.

2. Battery

As of the battery, there is a modest 41Wh unit, powering the huge 17-inch screen.

3. Memory and storage

In terms of upgradability, the 470 G7 is well packed. There are two RAM SODIMM slots, which support up to 16GB of DDR4 memory, working at 2666 MHz. Storage-wise, you can see an M.2 slot with PCIe x2 and SATA support, as well as a 2.5″ SATA drive bay.

4. Cooling system

Inside, you’ll see a single, thick heat pipe, cooling both the CPU and the graphics card. Despite the fact we are talking about energy-efficient hardware, it is usually not a great idea to connect your two main heat sources.