Inside HP 340S G7 – disassembly and upgrade options

LaptopMedia.com Höjdpunkter Inside HP 340S G7 - disassembly and upgrade options

Från: Alex Iliev 14 Februari 2020 / 03:00 1

HP has tried to produce a budget business notebook that should offer a somewhat stylish look and a big deal of versatility. You could say that they did a good job when you look at what it has on the inside.

Check out all HP 340S G7 prices and configurations in our Specs System or read more in our In-Depth review.

#CommissionsEarned

HP 340S G7

Processor: Intel Core i3-1005G1
Grafikkort: Intel UHD Graphics G1
RAM: 8GB RAM
STORAGE: 256GB SSD

Detaljerad recension

Kolla priset

HP 340S G7

Processor: Intel Core i5-1035G1
Grafikkort: Intel UHD Graphics G1
RAM: 8GB RAM
STORAGE: 256GB SSD

Detaljerad recension

Kolla priset

HP 340S G7

Processor: Intel Core i3-1005G1
Grafikkort: Intel UHD Graphics G1
RAM: 8GB RAM
STORAGE: 256GB SSD

Detaljerad recension

Kolla priset

Visa alla resultat

1. Remove the bottom plate

Not again… HP has once again tried to trick us, ladies and gentlemen. As soon as we saw the bottom panel on this device we felt a cold sweat run down our foreheads. There are only four Phillips-head screws naked to the eye. However, you need to remove the two long rubber feet as they house four more screws. Thankfully, our plastic pry tool is exactly the same size as the feet, and we were able to easily remove them, without destroying them.

2. Battery

While the battery is not the biggest, seen on a 14-inch laptop, it is also not the smallest – 41Wh.

3. Memory and storage

This device has two RAM SODIMM slots for up to 16GB of memory in total. Additionally, you can upgrade the storage with an M.2 PCIe NVMe drive, and a 2.5″ SATA drive slot.