Inside HP ProBook 450 G6 – disassembly and upgrade options

LaptopMedia.com Destacados Inside HP ProBook 450 G6 - disassembly and upgrade options

Desde: Alex Iliev 11 Noviembre 2019 / 04:15 0

In a world of business notebooks, the HP ProBook 450 G6 is probably one of the best-balanced challengers.

Check out all HP ProBook 450 G6 prices and configurations in our Specs System or read more in our In-Depth review.

#CommissionsEarned

HP ProBook 450 G6

Procesador: Intel Core i5-8265U
Tarjeta de vídeo: Intel UHD Graphics 620
RAM: 16GB RAM
ALMACENAMIENTO: 512GB SSD + 1000GB HDD

Reseña detallada

€1267^.12

Ver todos los resultados

1. Remove the bottom plate

HP has been very lenient on screws with this one, as there are only 7 in place. After you remove them, you only need to pop the plate open with a plastic pry tool. If we can give you any advice on that, make sure you start from the backside, as it is significantly easier to insert the pry tool there.

2. Battery

While the battery pack is not the largest out there, only reaching a 45Wh capacity, we found out that the battery life is relatively normal. As of usual – the first thing you need to do when you open your machine is to disconnect the battery connector from the motherboard.

3. Memory and storage

Memory-wise, there are two RAM DIMMs, covered by a plastic protective sleeve. Again, the type of memory is DDR4 with a maximum speed of 2667 MHz and topping at 32 GB. Its storage options include an M.2 slot with NVMe support and a SATA connector, just on the left to the battery.

4. Cooling system

There are two heat pipes running directly from the CPU towards the heatsink. We should note that the heat pipes are extremely long, running almost through 70% of the length of the laptop, and then making a sharp 90-degree turn.