Lenovo ThinkPad E16 Gen 1 (AMD) review – snappy business device with long battery life

Disassembly, Upgrade options, and Maintenance

If you want to open the laptop, you have to undo 7 captive Phillips-head screws. Then, you can pry the bottom panel with a plastic tool starting from the zone behind the hinge area.

There is a dedicated cooling pad on the inside of the metal bottom plate that makes contact with the preinstalled SSD.

The battery is the optional 57Wh variant. The default version is a 47Wh unit. To remove the battery, detach the connector from the motherboard and undo the three Phillips-head screws, that are fixing the unit in place. The optional capacity is enough for 14 hours and 17 minutes of Web browsing, or 10 hours of video playback. That’s a good result!

The memory section is covered by a metal plate. All devices come with 8GB of soldered RAM but there is a SODIMM for future upgrades. You get up to 40GB of DDR4-3200 MHz memory in dual-channel mode.

For storage, there are two M.2 slots – one for 2280 NVMes and one for the shorter 2242 units. The slots are compatible with Gen 4 SSDs but their speed will be limited to the Gen 3 standard due to platform limitations. There is a thin thermal pad below the NVMe.

The cooling looks sufficient for a laptop with an iGPU. It comprises a single fan, two heat pipes, one heat sink, and a heat spreader.

Author: Nikolay Palaozov

Author: eng. Kroum NikolovHead of Engineering at LaptopMedia.com, inventor and innovator with 40+ years of experience in electronics and high technology.

Feliratkozás

Értesítés

új követő hozzászólásokrólúj válaszokról az én hozzászólásaimra

I allow to use my email address and send notification about new comments and replies (you can unsubscribe at any time).

{} [+]

Name*

Email*

Website

I agree to the Terms and Privacy Policy.

The comment form collects your name, email, and content to allow us keep track of the comments placed on the website. Please read and accept our website Terms and Privacy Policy to post a comment.

{} [+]

Name*

Email*

Website

I agree to the Terms and Privacy Policy.

The comment form collects your name, email, and content to allow us keep track of the comments placed on the website. Please read and accept our website Terms and Privacy Policy to post a comment.

1 Comment

Beágyazott visszajelzések

Összes hozzászólás megtekintése

Janusz

2 évek ezelőtt

Bardzo mnie ciekawi, czy po zainstalowaniu w komputerze dwóch fizycznych dysków istnieje opcja wyłączenia jednego z nich w bios? Bardzo mi zależy na uruchomieniu trybu praca – dom na służbowym sprzęcie:)

0

Válasz