Inside Acer Predator Triton 300 (PT315-52) – disassembly and upgrade options

LaptopMedia.com Najważniejsze informacje Inside Acer Predator Triton 300 (PT315-52) - disassembly and upgrade options

Od: Alex Iliev 07 Lipiec 2020 / 02:00 0

This Predator Triton 300 (PT315-52) has some fresh changes over its predecessor and one of them is the upgrade to three M.2 slots.

Check out all Acer Predator Triton 300 (PT315-52) prices and configurations in our Specs System or read more in our In-Depth review.

#CommissionsEarned

Acer Predator Triton 300 (PT315-52)

Procesor: Intel Core i5-10300H
Karta graficzna: NVIDIA GeForce GTX 1650 Ti (Laptop, 50W, 128-bit)
RAM: 8GB RAM
STORAGE: 1024GB SSD

Szczegółowa recenzja

Sprawdź cenę

1. Remove the bottom plate

11 Philips-head screws are keeping you away from the internals of the new Predator Triton 300. After you undo them, just pry the bottom panel away with a plastic tool or a guitar pick.

2. Battery

Battery-wise, there is a 58.75Wh unit, which isn’t the largest one out there, but it’s not too small, as well.

3. Memory and storage

In terms of storage, there are three M.2 slots. Not bad for a budget offering. As of the memory, the device supports up to 32GB of DDR4 RAM in dual-channel.

4. Cooling system

Now, let’s take a look at the cooling. It consists of three heat pipes, one of which is common for both the CPU and the GPU. However, despite the low amount of heat pipes, you can see a total of four heat sinks. This, combined with the huge fans and the pretty sizeable metal plates, placed over the VRMs and the video memory, should deliver a more than decent cooling capacity.