Inside Dell Latitude 14 5411 – disassembly and upgrade options
If you need a business laptop that has a ton of horsepower, the Latitude 14 5411 is a very reasonable option. Plus it packs offers good upgradability down the line.
1. Remove the bottom plate
This device’s bottom plate is held in place by 8 captive Phillips-head screws. After you undo them, pry the panel with a plastic tool, preferably starting from one of the front edges.
The notebook comes with two options, regarding the battery – a 51Wh unit, and a 68Wh one.
3. Memory and storage
Memory-wise, there are two RAM SODIMM slots, that support 64GB of DDR4 memory. As for the storage, our unit only has a single M.2 PCIe x4 slot. However, the model that comes with the smaller battery, features a 2.5-inch SATA drive bay.
4. Cooling system
As expected from a laptop with an H-series processor, there is a decent cooling solution, that consists of two heat pipes. One thick and one thinner. Interestingly, the fan is pretty small in diameter, but its profile is thick, which should result in a relatively high airflow.