Inside Dell Vostro 3591 – disassembly and upgrade options

LaptopMedia.com 亮点 Inside Dell Vostro 3591 - disassembly and upgrade options

从: Alex Iliev 05 5月 2020 / 02:00 0

A dated look of a 2020 device is nothing uncommon. In order to keep the budget low-enough, manufacturers use well-polished several generations-old chassis. However, inside we find an Ice Lake processor with some decent upgradability options – take a look.

Check out all Dell Vostro 3591 prices and configurations in our Specs System or read more in our In-Depth review.

#CommissionsEarned

Dell Vostro 3591

处理器: Intel Core i7-1065G7
显卡: NVIDIA GeForce MX230 (2GB GDDR5)
RAM: 16GB RAM
STORAGE: 512GB SSD + 2000GB HDD

详细评测

价钱多少？

Dell Vostro 3591

处理器: Intel Core i7-1065G7
显卡: NVIDIA GeForce MX230 (2GB GDDR5)
RAM: 8GB RAM
STORAGE: 512GB SSD

详细评测

价钱多少？

Dell Vostro 3591

处理器: Intel Core i5-1035G1
显卡: NVIDIA GeForce MX230 (2GB GDDR5)
RAM: 8GB RAM
STORAGE: 256GB SSD

详细评测

价钱多少？

查看所有结果

1. Remove the bottom plate

Getting inside of this laptop is fairly easy. It requires a Phillips screwdriver, as well as a plastic pry tool. First, you need to unscrew all 10 of the screws, holding the bottom plate onto the chassis. Then, turn the laptop around and open the lid. Here, you would like to start the prying process around the touchpad area. Then slowly make your way around the device. After that, just turn it upside down and lift the bottom plate away.

2. Battery

First, there is a 42Wh battery pack powering the notebook, when you don’t have it connected to the wall.

3. Memory and storage

Upgradability looks great here – there are two storage options. An M.2 PCIe x4 slot and a 2.5″ SATA drive bay, flanking the battery. As of the memory – you get two RAM SODIMM slots that support up to 16GB of DDR4 memory, working at 2666 MHz. By the way, Dell’s official specs sheet shows support of 3200 MHz RAM as well.

4. Cooling system

In terms of cooling, there is a single, yet thick heat pipe, which drives the heat away from both the processor and the graphics card. It is a common solution but honestly, it is not a great idea to connect your two main heat sources, especially when there is only one heat spreader.