United Kingdom
India
Deutschland
France
Canada
España
Belgium
Netherlands
Poland
Sweden
България
Australia
Singapore
Italia
中国
日本How to open HP Victus 16 (16-r0000) – disassembly and upgrade options
Step 1: Opening the HP Victus 16 (16-r0000)
- Ensure the HP Victus 16 (16-r0000) is powered off and placed on a soft, clean surface to prevent scratches or damage.
- Remove the 8 Phillips-head screws from the bottom of the laptop.
- Use a plastic tool to gently pry the bottom panel away from the chassis, starting at one corner and carefully working your way around.
Hint: Be cautious when prying to avoid damaging internal components or the clips holding the panel in place.
Step 2: Battery Removal
- Disconnect the battery by pulling out its connector from the motherboard.
- Remove the 6 Phillips-head screws securing the 70Wh battery, then carefully lift it away from the chassis.
More info: The 70Wh battery provides up to 7 hours and 9 minutes of web browsing or video playback, offering solid battery life for gaming and productivity tasks.
Memory Upgrade
Identify the two SODIMM slots that officially support up to 32GB of DDR5 RAM, capable of operating at 4800MHz or 5200MHz, though the installed memory may be rated at 5600MHz.
Upgrade Tip: Consider maximizing the memory to improve overall system responsiveness and speed.
You can buy DDR5 RAM modules here: Buy from Amazon.com (#CommissionsEarned)
Storage Upgrade
- Note the configuration differences: Intel Raptor Lake -H CPU models feature one M.2 Gen 4 slot, while Raptor Lake-HX variants offer two Gen 4 SSD slots.
- The NVMe SSD is shielded by two metal plates, with the top plate featuring a thin thermal pad for enhanced cooling.
Hint: Don’t forget to check out our Top M.2 SSDs Performance Rankings for insights on the best storage options available.
You can buy Gen 4 M.2 SSD modules here: Buy from Amazon.com (#CommissionsEarned)
Cooling System Overview
Examine the cooling system, which includes two fans, two thick heat pipes shared between the CPU and GPU, an additional pipe dedicated to the GPU, three heat sinks, and three heat spreaders, designed to efficiently manage the thermal output of the device.
