Inside MSI GS66 Stealth – disassembly and upgrade options

LaptopMedia.com Höjdpunkter Inside MSI GS66 Stealth - disassembly and upgrade options

Från: Alex Iliev 18 November 2020 / 05:25 0

The GS66 Stealth offers huge improvements over its predecessor. Perhaps the biggest of them is the fact that you can easily upgrade your hardware.

Check out all MSI GS66 Stealth prices and configurations in our Specs System or read more in our In-Depth review.

#CommissionsEarned

MSI GS66 Stealth

Processor: Intel Core i7-10750H
Grafikkort: NVIDIA GeForce RTX 2070 Max-Q
RAM: 16GB RAM
STORAGE: 1000GB SSD

Detaljerad recension

Kolla priset

Visa alla resultat

1. Remove the bottom plate

In order to get inside of this notebook, there are 9 Phillips-head screws you need to undo. Keep in mind that one of them has a Factory seal, which may or may not void your warranty.

2. Battery

Thankfully, the battery here is huge. Actually, it is the maximum allowed on airplanes – 99.9 Wh.

3. Memory and storage

In terms of upgradeability, there are two RAM SODIMM slots, supporting up to 64GB of DDR4 memory. And for storage, you get two M.2 PCIe x4 slots with RAID support, and one of them can fit M.2 SATA drives as well.

4. Cooling system

Here, we see a huge improvement over last year’s GS65 Stealth. Finally, the motherboard is placed the right side up, so you can see the cooling and upgrade everything you need without the need of removing the entire board. Here, the cooling solution consists of 7 heat pipes. Three of them are cooling only the processor, and three are cooling the GPU. One of the latter is pretty thick and connects to two heat sinks. By the way, the amount of heat sinks here is four, the fans are three, and as you can see, the VRMs and the graphics memory are also cooled by some metal brackets and a heat pipe.