How to open Acer Swift Edge (SFE16-43) – disassembly and upgrade options


Removing the Bottom Plate

  1. Turn off the device and unplug all connected peripherals.
  2. Remove the 10 Torx-head screws securing the bottom panel.
  3. Using a plastic tool, carefully pry up the bottom panel starting from one of the zones beneath the hinges.


Battery

Caution: The battery is glued to the base with strong adhesive, making removal risky. Detaching the battery by force may cause it to bend or damage, so it’s advised not to attempt removing it.

Note: The Acer Swift Edge features a 54Wh battery capable of up to 6 hours and 40 minutes of web browsing or 5 hours and 53 minutes of video playback.


Memory Upgrade

The Acer Swift Edge comes with soldered memory and does not support RAM upgrades. The device is equipped with up to 32GB of LPDDR5 RAM in dual-channel configuration, providing good future-proofing.


Storage Upgrade

  1. Locate the two M.2 slots on the motherboard. One is easily visible, while the other is concealed beneath a ZIF ribbon connector.
  2. Carefully disconnect the ZIF ribbon connector to access the hidden M.2 slot.
  3. Proceed to upgrade or add a new SSD as needed.

Hint: Don’t forget to check out our Top M.2 SSDs Performance Rankings for advice on choosing the best SSD.

You can buy Gen 4 SSDs here: Buy from Amazon.ca (#CommissionsEarned)


Cooling System

The cooling system includes two small fans, a single heat pipe, one heat sink, and a heat spreader for effective heat dissipation.

Subscribe
Notify of
guest
0 Comments
Inline Feedbacks
View all comments