How to open ASUS Vivobook 17 F1704 (X1704) – disassembly and upgrade options
Step 1: Accessing the Internal Components
- Ensure the ASUS Vivobook 17 F1704 (X1704) is powered off and placed on a soft, clean surface to prevent scratches or damage.
- Remove the 11 Phillips-head screws from the bottom of the laptop.
- Use a plastic tool to gently pry the bottom panel off, starting from one of the top two corners.
Hint: Be careful during this process to avoid damaging the internal clips or the laptop casing.
Step 2: Removing the Battery
- Disconnect the battery by pulling out its connector from the motherboard.
- Remove the 4 Phillips-head screws securing the battery to the laptop’s chassis, then lift the 50Wh battery away from the device.
Caution: Handle the battery and its connector with care to avoid any damage.
More info: The 50Wh battery provides up to 7 hours and 9 minutes of web browsing or video playback, offering satisfactory battery life for daily usage.
Memory Upgrade
- Identify the SODIMM slot for memory expansion. The laptop comes with either 4 or 8GB of soldered DDR4 RAM, and the SODIMM slot allows for an additional up to 16GB of DDR4 RAM.
- Note that while the RAM stick is rated at 3200MHz, it operates at 2666MHz frequency due to system limitations.
Hint: Upgrading the RAM can significantly enhance the laptop’s multitasking capabilities and overall performance.
You can buy DDR4 RAM modules here: Buy from Amazon.com (#CommissionsEarned)
Storage Upgrade
- Locate the M.2 slot compatible with Gen 4 SSDs for a high-speed storage upgrade.
- Consider installing a new NVMe SSD to enhance the laptop’s storage capacity and speed.
You can buy Gen 4 M.2 SSD modules here: Buy from Amazon.com (#CommissionsEarned)
Examining the Cooling System
Inspect the cooling system, which includes one fan, one long heat pipe, a single heat sink, and a heat spreader, designed to efficiently manage the thermal output of the device.