How to open HP EliteBook 650 G10 – disassembly and upgrade options


Step 1: Accessing the Internal Components

  1. Ensure the HP EliteBook 650 G10 is powered off and placed on a soft, clean surface to prevent scratches or damage.
  2. Remove the 5 Phillips-head screws from the bottom of the laptop.
  3. Use a plastic tool to gently pry the bottom panel off, starting from the top two corners.

Hint: Be careful when prying to avoid damaging the internal clips or the laptop casing.


Step 2: Removing the Battery

  1. Disconnect the battery by unplugging its connector from the motherboard.
  2. Remove the six Phillips-head screws securing the battery to the laptop’s chassis, then lift the 51.3Wh battery away from the device.

Caution: Handle the battery and its connector with care to avoid any damage.

More info: The 51.3Wh battery offers up to 11 hours and 7 minutes of web browsing, or 7 hours and 9 minutes of video playback, providing solid battery life for productivity and entertainment.


Memory Upgrade

  1. Identify the two SODIMM slots available for memory upgrades.
  2. Install up to 64GB of DDR4-3200MHz RAM in dual-channel mode to enhance the laptop’s multitasking and processing capabilities.

Hint: Ensuring both RAM slots are used can optimize the laptop’s performance through dual-channel mode.

You can buy DDR4 RAM modules here: Buy from Amazon.com (#CommissionsEarned)


Storage Upgrade

  1. Locate the M.2 slot for 2280 Gen 4 SSDs to upgrade the primary storage device for faster data access and larger storage capacity.

You can buy Gen 4 M.2 SSD modules here: Buy from Amazon.com (#CommissionsEarned)


Step 3: Examining the Cooling System

  1. Review the cooling system, which includes one large fan, a single heat pipe, one heat sink, and a heat spreader, designed to manage the thermal output efficiently.

Subscribe
Notify of
guest
0 Comments
Inline Feedbacks
View all comments