How to open HP Victus 16 (16-s0000, 2023) – disassembly and upgrade options

Power off the HP Victus 16 (16-s0000, 2023) and place it on a soft, clean surface to prevent any scratches or damage.
Remove the 8 Phillips-head screws securing the bottom panel of the laptop.
Use a thin prying tool to gently pop the bottom plate off, starting from the back of the device.

Hint: Proceed with caution to avoid damaging the clips that secure the bottom panel.

Step 2: Removing the Battery

Disconnect the battery by detaching its connector from the motherboard.
Remove the 6 Phillips-head screws holding the battery in place, then lift it away from the chassis.

Caution: Be gentle when disconnecting the battery to avoid any damage to the connector.

More info: The device comes with a default 70Wh battery, capable of providing up to 10 hours of web browsing or video playback. An optional 83Wh variant is also available for extended use.

Step 3: Upgrading Memory

Find the two SODIMM slots designated for RAM upgrades.
Install or upgrade to DDR5-5600MHz RAM sticks to reach up to 96GB in dual-channel mode.

You can buy DDR5 RAM modules here: Buy from Amazon.com (#CommissionsEarned)

Step 4: Upgrading Storage

Locate the single M.2 slot on the motherboard, which is compatible with Gen 4 SSDs.
Upgrade or install a new NVMe SSD, making sure the preinstalled metal shroud and its thermal pad are properly reattached for optimal cooling.

You can buy Gen 4 M.2 SSD modules here: Buy from Amazon.com (#CommissionsEarned)

Step 5: Examining the Cooling System

Inspect the cooling system, which includes two fans, two thick heat pipes shared between the CPU and GPU, and an additional pipe dedicated to the GPU cooling.
Note the presence of three heat sinks and three heat spreaders, designed to efficiently manage the device’s thermal performance.