How to open Dell Vostro 15 3530 – disassembly and upgrade options

LaptopMedia.com Highlights How to open Dell Vostro 15 3530 – disassembly and upgrade options

From: Nikolay Palaozov 03 November 2023 / 11:07 0

#CommissionsEarned

Dell Vostro 15 3530

Processor: Intel Core i3-1305U
VideoCard: Intel UHD Graphics (Alder Lake, 64EU)
RAM: 16GB RAM
STORAGE: 512GB SSD

Detailed review

$499^.99

Dell Vostro 3530

Processor: Intel Core i7-1355U
VideoCard: Intel Iris Xe Graphics G7 (96EU)
RAM: 32GB RAM
STORAGE: 1000GB SSD

Detailed review

$1980^.45

View all results

1. Removing the Bottom Plate

– Ensure the laptop is powered off and unplugged from any external power source.
– Flip the laptop to access its bottom side.
– Unscrew the 8 Phillips-head screws. Remember, the ones in the top corners are captive and will slightly lift the plate.
– Start prying the panel with a plastic tool from where the captive screws lifted it.

2. Battery Removal

– To ensure safety while handling internal components, first, disconnect the battery.
– Carefully unplug the battery connector from the mainboard.
– Unscrew the 4 Phillips-head screws holding the battery in place.
– Lift and remove the battery.

3. Memory (RAM) Upgrade

– The laptop features two SODIMM slots that can accommodate either DDR4-3200MHz or DDR4-2666MHz RAM.
– Depending on the model and the type of Type-C port, the RAM speed can vary. If the laptop has a regular Type-C port, it is equipped with slower RAM. Devices with Type-C ports supporting DisplayPort 1.4 and Power Delivery have faster memory.
– To upgrade or replace, gently release the clips holding the memory sticks and carefully pull them out. Insert the new ones ensuring they click into place.

4. Storage Upgrade

– The Vostro 15 3530 comes with an M.2 slot that can handle 2230 or 2280 Gen 4 SSDs.
– To replace or upgrade the SSD, remove the securing screw and gently pull out the current SSD.
– Place the new SSD in, ensuring it’s properly seated, and then secure it with the screw.
– Remember, there’s a metal shroud with a thermal pad inside, meant to dissipate heat from the SSD. Make sure it’s correctly placed.

5. Cooling System Maintenance

– The cooling system is relatively simple, with one fan and one heat pipe.
– For maintenance, make sure the fan blades are clean. Dust accumulation can reduce efficiency.
– If the device is overheating, consider seeking professional help to replace the thermal paste or check for any malfunctioning components.

Note: Working with internal components requires care. If unsure about any step, it’s advisable to consult with a professional or visit an authorized service center. Also, keep in mind that opening the laptop might void its warranty, so always check warranty conditions beforehand.